Your cart is currently empty!
-30%
Only 1 pump in stock for sale. Sold in existing condition. The pump has been submerged in a well once and has been started. The cable that comes with it is about 70 cm. There is cosmetic damage to the pump such as scratches, see examples in the pictures.
Only 1 pump in stock for sale. Sold in existing condition. The pump has been submerged in a well once and has been started. The cable that comes with it is about 70 cm. There is cosmetic damage to the pump such as scratches, see examples in the pictures.
Art.nr: xylq-8863
AC deep well pump 4″ 4S20, 1,5KW, 230Volt SALES EXAMPLES
Only 1 pump in stock for sale, sold as is. The pump has been submerged in a well once and has been started. The cable that comes with it is about 70 cm. There is cosmetic damage to the pump such as scratches, see examples in the pictures.
Original price was: 919,54 €.643,54 €Current price is: 643,54 €.
Only 1 pump in stock for sale. Sold in existing condition. The pump has been submerged in a well once and has been started. The cable that comes with it is about 70 cm. There is cosmetic damage to the pump such as scratches, see examples in the pictures.
Suitable for boreholes at a maximum of 100 meters water level with large flow, for example to two houses. Highest quality and very low weight.
Dimension the maximum pressure (head) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: about 5 meters
Static lift height (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum lifting height by far.
The pump diameter is 100mm and requires at least 115mm inner diameter of the casing
Separate junction box
All single-phase pumps need a capacitor, sometimes mounted inside the motor and sometimes outside.
This pump comes with an external junction box containing switches, an automatic fuse and a capacitor.
The four conductors are earth, phase, neutral and an additional neutral via capacitor.
capacitor is to simulate three-phase operation.
The advantage of this is that a thinner 4-wire cable is used, which is cheaper, and it is easy to replace the capacitor if it breaks.
The disadvantage is that you get an extra cabinet to assemble.
The junction box should be installed in a dry place for better component life.
The pump is divisible
An advantage of this pump is that it can be easily separated into two parts, the electric motor and the pump part.
This means that if the pump’s electric motor or pump part breaks down, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
The pump is designed in accordance with the NEMA standard (the pump’s hydraulics will be compatible with most motors available on the market) and made of high quality AISI 316 stainless steel. Floating impellers made of black technopolymer ensure easier flow and higher resistance to sand present in the pumped water up to 200 mg/l.
Submersible well pump 4S with Sumoto motor
We offer a model of a pump for a deep well – 4S from Belgiardino with a reliable Sumoto engine.
This small unit with a diameter of 100 cm and in which the electric motor weighs only 6 kg is ideal not only for private use for single-family houses, but also for small businesses. This four-inch pump offers very good performance parameters, is characterized by low operating costs and operational safety.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
The Italian Belgiardino pump is equipped with Sumoto motor. Thanks to a fairly powerful engine, this model is recommended for powering extensive irrigation systems for gardens, construction sites, filling swimming pools, fire protection systems or single-family houses.
The main advantages of the Belgiardino 4S pump
The pump can pump water containing up to 200g/m3 of sand and operate in an immersion of 120m. In addition, the high quality of the materials that make up the pump components are made mainly of stainless steel, which also leads to high abrasion resistance.
It includes a check valve.
May need to be purchased for
- Pem slang
- Drill cap, cover for the borehole to protect against contamination
- Lifting cables and clamps
- Single adapter for connecting the pump to the feed pipe
Connection on the outlet is internal thread R32 (1 1/4″)
Technical data
Max capacity: 90 l/min.
Maximum lifting height: 147 m.
Engine power: 1.5 kW.
Voltage: 230V.
Outlet: Female thread R32 (1 1/4″)
Height: 894 mm.
Pump diameter: 100 mm
Weight 7.5 kg, without cable
Maximum water temperature: 35°C.
Degree of protection: IP 68.
Winding insulation class: B.
Number of starts up to [x/hour]: 20.
Minimum cooling flow rate for the engine: 0.08 m/s.
Working position: vertical.
Material:
Pump housing: stainless steel.
Cable sheath: stainless steel.
Pump shaft: stainless steel.
Impellers and diffusers: glass fiber reinforced material
Inlet strainer: stainless steel.
Outlet: brass.
Suction body: brass.
Product details
Article number:
xylq-8863
Only 1 pump in stock for sale. Sold in existing condition. The pump has been submerged in a well once and has been started. The cable that comes with it is about 70 cm. There is cosmetic damage to the pump such as scratches, see examples in the pictures.
Suitable for boreholes at a maximum of 100 meters water level with large flow, for example to two houses. Highest quality and very low weight.
Dimension the maximum pressure (head) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: about 5 meters
Static lift height (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum lifting height by far.
The pump diameter is 100mm and requires at least 115mm inner diameter of the casing
Separate junction box
All single-phase pumps need a capacitor, sometimes mounted inside the motor and sometimes outside.
This pump comes with an external junction box containing switches, an automatic fuse and a capacitor.
The four conductors are earth, phase, neutral and an additional neutral via capacitor.
capacitor is to simulate three-phase operation.
The advantage of this is that a thinner 4-wire cable is used, which is cheaper, and it is easy to replace the capacitor if it breaks.
The disadvantage is that you get an extra cabinet to assemble.
The junction box should be installed in a dry place for better component life.
The pump is divisible
An advantage of this pump is that it can be easily separated into two parts, the electric motor and the pump part.
This means that if the pump’s electric motor or pump part breaks down, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
The pump is designed in accordance with the NEMA standard (the pump’s hydraulics will be compatible with most motors available on the market) and made of high quality AISI 316 stainless steel. Floating impellers made of black technopolymer ensure easier flow and higher resistance to sand present in the pumped water up to 200 mg/l.
Submersible well pump 4S with Sumoto motor
We offer a model of a pump for a deep well – 4S from Belgiardino with a reliable Sumoto engine.
This small unit with a diameter of 100 cm and in which the electric motor weighs only 6 kg is ideal not only for private use for single-family houses, but also for small businesses. This four-inch pump offers very good performance parameters, is characterized by low operating costs and operational safety.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
The Italian Belgiardino pump is equipped with Sumoto motor. Thanks to a fairly powerful engine, this model is recommended for powering extensive irrigation systems for gardens, construction sites, filling swimming pools, fire protection systems or single-family houses.
The main advantages of the Belgiardino 4S pump
The pump can pump water containing up to 200g/m3 of sand and operate in an immersion of 120m. In addition, the high quality of the materials that make up the pump components are made mainly of stainless steel, which also leads to high abrasion resistance.
It includes a check valve.
May need to be purchased for
- Pem slang
- Drill cap, cover for the borehole to protect against contamination
- Lifting cables and clamps
- Single adapter for connecting the pump to the feed pipe
Connection on the outlet is internal thread R32 (1 1/4″)
Technical data
Max capacity: 90 l/min.
Maximum lifting height: 147 m.
Engine power: 1.5 kW.
Voltage: 230V.
Outlet: Female thread R32 (1 1/4″)
Height: 894 mm.
Pump diameter: 100 mm
Weight 7.5 kg, without cable
Maximum water temperature: 35°C.
Degree of protection: IP 68.
Winding insulation class: B.
Number of starts up to [x/hour]: 20.
Minimum cooling flow rate for the engine: 0.08 m/s.
Working position: vertical.
Material:
Pump housing: stainless steel.
Cable sheath: stainless steel.
Pump shaft: stainless steel.
Impellers and diffusers: glass fiber reinforced material
Inlet strainer: stainless steel.
Outlet: brass.
Suction body: brass.
Article number:
xylq-8863