Baga effective 1.2M³ package biomodules 11m2

Shipping will be added, see shipping price at checkout or pick up from us in Västerås at no extra cost.

Sludge separator 1200L for bath, dish and wash water and infiltration package with biomodules

SLUDGE SEPARATOR:
BAGA’s sludge separator for BDT is intended for those who have a functioning toilet drain (dry toilet or closed tank) but need a waste solution to take care of bathing, washing dishes and laundry water. This sludge separator is not intended for connection to a WC.
The BDT separator is based on BAGA’s patented separation technology and, like the other sizes, is equipped with an integrated pump well. The design also simplifies sludge emptying as only one chamber is emptied.

Data
Height 1550mm
Diameter 1600mm
Wet volume 1200 liters
Sludge capacity 500 liters

Product benefits:
-Integrated pump well
-Very high separation efficiency
-Low profile

INFILTRATION:
Installation area 11m² (2×5.5m)
BAGA biomodules are advantageously used in individual sewage systems where a traditional soil or infiltration bed is to be installed, at a normal level of protection. The modules are also a good solution for installations at a high level of protection when a sewage system (BAGA Easy) with a bed
is to be built.
The function of the biomodule is to improve the oxygenation of the bacterial culture that reduces pollutants in the household’s
wastewater (i.e. water from bath, shower, laundry and dishes).

Meets the requirements by far
A bed with BAGA biomodules built according to the instructions meets the requirements set by the authorities for a high level of protection for health protection, and a normal level of protection for environmental protection.
The water that has passed through our modules is hygienized and the levels of pathogenic bacteria are far below the guideline values.

Consists of :
Spreader plates Dimensions 5.6 x2 m = 11 m²
5 Biomodules, aeration tubes,
geotextile 50 m², spreader tubes

With the biomodule package and spreader plates you can remove the macadam in the spreader layer
An example is the soil bed:
Old building height of the bed was 130 cm
Now the building height will be 55 cm high

To build a soil bed, the infiltration must be supplemented with drainage pipes or dense fabric if it is to be a dense soil bed.