Your cart is currently empty!
Art.nr: pip0661973
CABLE WELL ID 600mm H=1m
570,86 €
Note this is delivered without lid and bottom.
Inside diameter: 600 mm
Outside diameter: 688 mm
Stormwater pipes / Road culverts INSTA-CERT, Nordic Poly Mark.
K2-KAN ID fits K2 ID fittings
K2-Kan road drums are double-walled pipes in PP with corrugated outside and smooth inside. The pipes have high strength and good hydraulic properties and are developed for demanding installations with large earth and traffic loads. K2-Kan road drums meet both the Swedish Road Administration’s requirements in TK väg and the Swedish Railway Administration’s requirements for laying in railways.
Material: PP (polypropylene)
Standard: NordicPolymark,ATBRoad
Stiffness class: SN8
Execution: ID dimensioning
Standards, approvals and certificates:
– PN-En 13476-3+a1:2009 Plastic piping systems for underground drainage and sewerage without pressure. Piping systems of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) and polyethylene (PE) profiled pipes. Part 3: Specifications for pipes and fittings with smooth internal surface and profiled surface and type B systems.
– PN-EN 476:2012 General requirements for components used in wastewater and stormwater systems.
– PN-EN 681-1:2002 Elastomeric sealing rings – Materials requirements for sealing rings for water pipes and drainage systems – Part 1: Rubber
Product details
Article number:
pip0661973
No files available.
Note this is delivered without lid and bottom.
Inside diameter: 600 mm
Outside diameter: 688 mm
Stormwater pipes / Road culverts INSTA-CERT, Nordic Poly Mark.
K2-KAN ID fits K2 ID fittings
K2-Kan road drums are double-walled pipes in PP with corrugated outside and smooth inside. The pipes have high strength and good hydraulic properties and are developed for demanding installations with large earth and traffic loads. K2-Kan road drums meet both the Swedish Road Administration’s requirements in TK väg and the Swedish Railway Administration’s requirements for laying in railways.
Material: PP (polypropylene)
Standard: NordicPolymark,ATBRoad
Stiffness class: SN8
Execution: ID dimensioning
Standards, approvals and certificates:
– PN-En 13476-3+a1:2009 Plastic piping systems for underground drainage and sewerage without pressure. Piping systems of unplasticized polyvinyl chloride (PVC-U), polypropylene (PP) and polyethylene (PE) profiled pipes. Part 3: Specifications for pipes and fittings with smooth internal surface and profiled surface and type B systems.
– PN-EN 476:2012 General requirements for components used in wastewater and stormwater systems.
– PN-EN 681-1:2002 Elastomeric sealing rings – Materials requirements for sealing rings for water pipes and drainage systems – Part 1: Rubber
Article number:
pip0661973
No files available.