Your cart is currently empty!
Art.nr: novSQUEALER-2
Novabo Squealer SET-101 (High Level & Slam)
Measure maximum level and sludge or silt level in any type of sedimentation tank or separator with integrated sedimentator (oil, grease, petroleum substances).
1 x SQUEALER-2
1 x MAX
1 x SLUDO
790,74 €
Description of the project
The set includes SQUEALER controller, MAX and SLUDO probe. The set is built on the basis of a modern microprocessor for continuous monitoring of the status of selected probes. The basic parameters of the controller are 2 inputs, 1 relay output, LEDs indicating normal state, fault status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.
SQUEALER-2
– 2 inputs (spillage, grease layer thickness or oil level, sludge level)
– 1 output (potential-free relay)
– 230V power supply
– Hermetic enclosure used outdoors
– Dipswitch (programming with dipswitches)
– Visual and audible signals of problems and alarms on the front panel
– Sensor diagnostics (opening/short circuit)
MAX
(overflow probe, with 5m cable, 4-20mA, ATEX, 4-20mA) Oil level measurement
; measurement of petroleum substances; measurement of grease layer thickness; conductivity technique; ATEX certified. Output signal 4-20mA.
SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; operate in full liquid immersion; ATEX certified. Output signal 4-20mA.
Description of the front panel.
– LED green – probe is OK
– LED lights alternately green and red – ALARM
– LED is alternately yellow and red – ERROR
– Short press – cancels acoustic alarm signal.
– Long press on the button – device test (LED, BUZER and RELAY). Test only possible in normal state (without alarm).
Technical data
– Power: 230V AC
– Max. fuse: 1.25 A
– Power consumption (nominal): 2.2 VA
– Output: NO/NC potential free relay, 2A/120VAC or 2A/24VDC
– Ambient temperature: -40 to + 60 °C
– Mechanical strength: IK 07
– Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm
Product details
Article number:
novSQUEALER-2
Description of the project
The set includes SQUEALER controller, MAX and SLUDO probe. The set is built on the basis of a modern microprocessor for continuous monitoring of the status of selected probes. The basic parameters of the controller are 2 inputs, 1 relay output, LEDs indicating normal state, fault status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.
SQUEALER-2
– 2 inputs (spillage, grease layer thickness or oil level, sludge level)
– 1 output (potential-free relay)
– 230V power supply
– Hermetic enclosure used outdoors
– Dipswitch (programming with dipswitches)
– Visual and audible signals of problems and alarms on the front panel
– Sensor diagnostics (opening/short circuit)
MAX
(overflow probe, with 5m cable, 4-20mA, ATEX, 4-20mA) Oil level measurement
; measurement of petroleum substances; measurement of grease layer thickness; conductivity technique; ATEX certified. Output signal 4-20mA.
SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; operate in full liquid immersion; ATEX certified. Output signal 4-20mA.
Description of the front panel.
– LED green – probe is OK
– LED lights alternately green and red – ALARM
– LED is alternately yellow and red – ERROR
– Short press – cancels acoustic alarm signal.
– Long press on the button – device test (LED, BUZER and RELAY). Test only possible in normal state (without alarm).
Technical data
– Power: 230V AC
– Max. fuse: 1.25 A
– Power consumption (nominal): 2.2 VA
– Output: NO/NC potential free relay, 2A/120VAC or 2A/24VDC
– Ambient temperature: -40 to + 60 °C
– Mechanical strength: IK 07
– Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm
Article number:
novSQUEALER-2