Your cart is currently empty!
Art.nr: xylQ-8458
Novabo Squealer SET-011 (Oil & Sludge)
Measure the maximum layer thickness of oil, grease, fat, petroleum substances and for measuring sludge, silt layers in any type of separator or liquid tank with integrated sedimentator (oil, grease, fat, petroleum substances separators with integrated precipitator).
1 x SQUEALER-2
1 x OILER
1 x SLUDO
790,74 €
Description of the project
The set includes SQUEALER controller and OILER and SLUDO probes. The set is built on the basis of a modern microprocessor for continuous monitoring of the status of selected probes. The basic parameters of the controller are 2 inputs, 1 relay output, LEDs indicating normal state, fault status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.
SQUEALER-2
– 2 inputs (spillage, grease layer thickness or oil level, sludge level)
– 1 output (potential-free relay)
– 230V power supply
– Hermetic enclosure used outdoors
– Dipswitch (programming with dipswitches)
– Visual and audible signals of problems and alarms on the front panel
– Sensor diagnostics (opening/short circuit)
OILER
(oil, grease, petroleum probe, with 5m cable, ATEX, 4-20mA) Oil level measurement
; measurement of petroleum substances; measurement of grease layer thickness; conductivity technique; ATEX certified. Output signal 4-20mA.
SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; operate in full liquid immersion; ATEX certified. Output signal 4-20mA.
Description of the front panel.
– LED green – probe is OK
– LED lights alternately green and red – ALARM
– LED is alternately yellow and red – ERROR
– Short press – cancels acoustic alarm signal.
– Long press on the button – device test (LED, BUZER and RELAY). Test only possible in normal state (without alarm).
Technical data
– Power: 230V AC
– Max. fuse: 1.25 A
– Power consumption (nominal): 2.2 VA
– Output: NO/NC potential free relay, 2A/120VAC or 2A/24VDC
– Ambient temperature: -40 to + 60 °C
– Mechanical strength: IK 07
– Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm
Product details
Article number:
xylQ-8458
Description of the project
The set includes SQUEALER controller and OILER and SLUDO probes. The set is built on the basis of a modern microprocessor for continuous monitoring of the status of selected probes. The basic parameters of the controller are 2 inputs, 1 relay output, LEDs indicating normal state, fault status and alarm status, buzzer generating an alarm signal, alarm output, relay output, activated at the time of alarm.
SQUEALER-2
– 2 inputs (spillage, grease layer thickness or oil level, sludge level)
– 1 output (potential-free relay)
– 230V power supply
– Hermetic enclosure used outdoors
– Dipswitch (programming with dipswitches)
– Visual and audible signals of problems and alarms on the front panel
– Sensor diagnostics (opening/short circuit)
OILER
(oil, grease, petroleum probe, with 5m cable, ATEX, 4-20mA) Oil level measurement
; measurement of petroleum substances; measurement of grease layer thickness; conductivity technique; ATEX certified. Output signal 4-20mA.
SLUDO
(sludge probe, with 5m cable, ATEX, 4-20mA)
Detection of the sediment layer; ultrasonic technology; impulse measurement; non-corrosive material; operate in full liquid immersion; ATEX certified. Output signal 4-20mA.
Description of the front panel.
– LED green – probe is OK
– LED lights alternately green and red – ALARM
– LED is alternately yellow and red – ERROR
– Short press – cancels acoustic alarm signal.
– Long press on the button – device test (LED, BUZER and RELAY). Test only possible in normal state (without alarm).
Technical data
– Power: 230V AC
– Max. fuse: 1.25 A
– Power consumption (nominal): 2.2 VA
– Output: NO/NC potential free relay, 2A/120VAC or 2A/24VDC
– Ambient temperature: -40 to + 60 °C
– Mechanical strength: IK 07
– Housing dimensions (without glands)(HxWxD): 96 x 130 x 66 mm
Article number:
xylQ-8458