ACO PROCURAT T5-2 level and slope sensor

The most common two-sensor level and attenuation alarm

Procurat is an EX-classified grease and oil separator alarm consisting of an electronic unit to which 3 independent sensors can be connected to alarm 3 separate alarm points.
The electronic unit is intended to be mounted directly on the wall and is equipped with an enclosure
IP65. It must not be installed in potentially explosive atmospheres.

– Layer sensor ES4 of the capacitive type to alarm when the layer of oil/grease exceeds the alarm value
– Sludge sensor ES8 with ultrasound to alarm when sand/particles in the separator exceed a predetermined level
– Dam sensor R6-S of the thermistor type for indication of elevated level.
– Central unit in intrinsically safe design and sensors EX-approved for installation and use in areas where there is a risk of explosion. The unit also has 2 potential-free relay outputs
(R1 and R2) that can be connected to external alarms or external monitoring.
These are individually programmable.

On the electronic unit there is a display for alarm texts, a reset button and navigation keys to navigate the display.

Power: 230 V
Dimensions: 180x80x130 mm
Information: With two sensors
Material: ABS

Color enclosure/frame White
Material enclosure/frame Plastic
Type of ton Single stroke
Rated voltage 230 V
Power supply Mains connected
Built-in transformer Yes
Power type AC (Alternating current)
Power consumption 5 A
Mounting method Surface mounting
With radio control No
Enclosure class (IP) IP65