Sepko Oil separator 3 l/s, sand trap 600 L, Standard package

Bestsellers with sampling brown, alarm and movable lids 40 tons

Shipping will be added on this item!

Small garage package underground, Class 1 separator.

Covering 40 tons of load.

Sampling well with 40 tons of cover

Larm Eneka UTA
H dimensions ie water inlet to finished ground is 1250-1500mm
Ask us if you want other H dimensions.

Inlet and outlet diameter 160mm
Diameter 1300mm
Weight 185kg

Sand trap volume 600l

Mounted ladder is integrated in the neck and provides an easy and safe descent to the container for service personnel.
The neck is designed with a telescopic function so that the water flow to the finished ground can be adjusted within a 200mm range.
The neck is designed for connection to standard polyethylene or cast iron telescopic cap/neck for load categories from A35 to D400.

maintenance is very simple, it does not require much labor and material costs. The main maintenance operation – washing of
coalescence modules with high pressure washer after removal from the container. Packages can be washed easily from 4 sides, so after the maintenance is returned to
the oil separator 100% functionality. In Sepko no replaceable filters are used which after the change would be disposed of as hazardous waste.
Oil products accumulated on the water surface are sucked away using special grips and drained to a separate oil storage tank.

SEPKO separators are tested and approved according to European standard EN 858-1. Treatment efficiency testing (i.e. determination of
the nominal size of the separator, water tightness and tank stability) was carried out by independent authorities.
After treatment with SEPKO, a residual hydrocarbon content in the water of less than 5 mg/l is achieved. This emission value is mandatory for
class I oil separators according to standard EN 858-1.