Your cart is currently empty!
idOil-30 3G the alarm system comes with a 3G data transmission module and antenna. Up to three idOil sensor of any type can be connected polarity-free, and they are automatically identified by a quick start function.
idOil-30 3G sends alarms and time measurements either directly to the user’s phone as a text message or to the LabkoNet server, from which the information can be distributed to other parties who need it. You can change the settings with the phone or via the device’s browser-based operating system.
Alerts are also sent by SMS
Item no.: 8540721
idOil-30 Battery (3G) is an alarm system for monitoring liquid levels, especially in oil and sand separators.
The system consists of the idOil controller and the idOil sensors installed in the separator.
Up to three idOil sensor of any type can be connected polarity-free, and they are automatically identified by a quick start function.
The sensor cables can be extended with a cable gland or junction box.
The idOil-30 Battery controller is also available with a 3G modem.
The idOil-30 battery module is disabled most of the time, which means it consumes very little power.
The device starts only at set measurement intervals to perform the sensor measurements, at listening intervals to receive any setup commands and at reporting intervals to send measurement values.
The power consumption depends on the set measurement and transmission intervals.
Battery Box 10 is a power supply for idOil-30 Battery 3G and idOil-30 Battery 3G level alarm.
Technical detail
IP classification: IP65
Enclosure material: Polycarbonate
Installation: Wall-mounted
Ambient temperature: -30 °C…+60 °C
Supply voltage: 100-240 V AC, 50/60 Hz
Compatible sensors: idOil-LIQ, idOil-OIL, idOil-SLU
Relay outputs: 5 A, 250 V AC/30 V DC, 100 VA, potential-free switching contacts
Electrical safety: Class I, CAT II IEC/EN 61010-1, UL 61010-1, CAN/CSA-C 22.2 NO. 61010-1-12
ATEX: EESF 21 ATEX 024X
IECEx: IECEx EESF 21.0017X
Ex-classification: Ex II (1) G [Ex ia Ga] IIB
idOil-30 3G the alarm system comes with a 3G data transmission module and antenna. Up to three idOil sensor of any type can be connected polarity-free, and they are automatically identified by a quick start function.
idOil-30 3G sends alarms and time measurements either directly to the user’s phone as a text message or to the LabkoNet server, from which the information can be distributed to other parties who need it. You can change the settings with the phone or via the device’s browser-based operating system.
Alerts are also sent by SMS
Item no.: 8540721
idOil-30 Battery (3G) is an alarm system for monitoring liquid levels, especially in oil and sand separators.
The system consists of the idOil controller and the idOil sensors installed in the separator.
Up to three idOil sensor of any type can be connected polarity-free, and they are automatically identified by a quick start function.
The sensor cables can be extended with a cable gland or junction box.
The idOil-30 Battery controller is also available with a 3G modem.
The idOil-30 battery module is disabled most of the time, which means it consumes very little power.
The device starts only at set measurement intervals to perform the sensor measurements, at listening intervals to receive any setup commands and at reporting intervals to send measurement values.
The power consumption depends on the set measurement and transmission intervals.
Battery Box 10 is a power supply for idOil-30 Battery 3G and idOil-30 Battery 3G level alarm.
Technical detail
IP classification: IP65
Enclosure material: Polycarbonate
Installation: Wall-mounted
Ambient temperature: -30 °C…+60 °C
Supply voltage: 100-240 V AC, 50/60 Hz
Compatible sensors: idOil-LIQ, idOil-OIL, idOil-SLU
Relay outputs: 5 A, 250 V AC/30 V DC, 100 VA, potential-free switching contacts
Electrical safety: Class I, CAT II IEC/EN 61010-1, UL 61010-1, CAN/CSA-C 22.2 NO. 61010-1-12
ATEX: EESF 21 ATEX 024X
IECEx: IECEx EESF 21.0017X
Ex-classification: Ex II (1) G [Ex ia Ga] IIB


