Your cart is currently empty!
Art.nr: xylQ-8445
AC Omnigena WQ 15-7-1,1 Premium, chopper pump for wastewater, 230V
Very affordable quality chewing pump!
1.011,54 €
The WQ 15-7-1.1 submersible pump is a pump designed for wastewater, sludge, dirty water with the presence of organic and household contaminants with a chewing function that cuts down all material.
A quality pump from the Polish family business Omnigen, which has been around since 1974 and has produced 1.3 million pumps.
The pump has an efficient cutting system that cuts the pumped medium into small pieces so that the installation does not clog and that you can use hose with diameters from 32mm.
The pump has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running.
We always recommend using the supplied overload protection to protect the pump motor.
One of the most common causes is blockage of the impeller which almost always ends with motor breakdown.
This protection should be installed in a dry place, not necessarily inside the building, but it cannot be exposed to moisture.
You can always disconnect the overload protection from the cable, extend the cable or install the overload protection in another safe place.
WQ 15-7-1.1 Premium is sized to provide a significant pressure of 18 mvp and a large flow of 5.7 l/sec required to ensure self-cleaning in sewer systems.
Technical data:
| Enclosure class | IP 68 |
| Maximum immersion depth [meters] | 10 |
| Working position | Vertical |
| Max flow rate | 340 l/min |
| Maximum pressure | 18 m |
| Voltage | 230 volts |
| Rated current | 6,5 A |
| Connection | 2″ (R50) female thread |
| Cable length | 9.3 m (Cable length between pump and motor protection 800cm, cable length from motor protection and plug 130cm). |
| Weight (kg) | 27 kg |
material
| Pump housing | Cast iron |
| Rotor | Cast iron |
| Cutting systems | Stainless steel |
| Pump shaft | Stainless steel |
Product details
Article number:
xylQ-8445
The WQ 15-7-1.1 submersible pump is a pump designed for wastewater, sludge, dirty water with the presence of organic and household contaminants with a chewing function that cuts down all material.
A quality pump from the Polish family business Omnigen, which has been around since 1974 and has produced 1.3 million pumps.
The pump has an efficient cutting system that cuts the pumped medium into small pieces so that the installation does not clog and that you can use hose with diameters from 32mm.
The pump has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running.
We always recommend using the supplied overload protection to protect the pump motor.
One of the most common causes is blockage of the impeller which almost always ends with motor breakdown.
This protection should be installed in a dry place, not necessarily inside the building, but it cannot be exposed to moisture.
You can always disconnect the overload protection from the cable, extend the cable or install the overload protection in another safe place.
WQ 15-7-1.1 Premium is sized to provide a significant pressure of 18 mvp and a large flow of 5.7 l/sec required to ensure self-cleaning in sewer systems.
Technical data:
| Enclosure class | IP 68 |
| Maximum immersion depth [meters] | 10 |
| Working position | Vertical |
| Max flow rate | 340 l/min |
| Maximum pressure | 18 m |
| Voltage | 230 volts |
| Rated current | 6,5 A |
| Connection | 2″ (R50) female thread |
| Cable length | 9.3 m (Cable length between pump and motor protection 800cm, cable length from motor protection and plug 130cm). |
| Weight (kg) | 27 kg |
material
| Pump housing | Cast iron |
| Rotor | Cast iron |
| Cutting systems | Stainless steel |
| Pump shaft | Stainless steel |
Article number:
xylQ-8445