AC WQ 1.1 INOX PRO SUBMERSIBLE PUMP 230V

The WQ INOX PRO submersible pump for gray water, rainwater, sewage and drainage has a wide range of applications.

It can be used both in agriculture, agritourism or small houses, as well as in municipal enterprises or in production processes. the design of the pump, with the discharge port located vertically on the pump cover, forces cooling through the pumped medium flowing along the motor.

Thanks to this solution, the pump can periodically operate in a state of incomplete immersion, for example, when pumping water from flooded rooms or drainage ditches. T

The pump has a float control which, depending on the level of the pumped liquid, controls its engagement and protects against dry running.

All pump components are made entirely of stainless steel.

Motor protection
We always recommend using the accompanying overload protection to protect the pump motor.
One of the most common causes is blockage of the impeller which almost always ends up destroying the motor.
This protection should be installed in a dry place, not necessarily inside the building, but it cannot be exposed to moisture.
You can always disconnect the overload protection from the cable, extend the cable or install the overload protection in another safe place.

Technical data:
Max capacity: 320 l/min
Max lifting height: 13 m
Motor power: 1.1 kW
Voltage: 230V
Outlet port: 1 ½”
Power cord length: 9.45 meters (Cord length between pump and motor cover 810cm, cord length between motor cover and plug 135cm).
Max contamination size: 30 mm
Max water temperature 35°C
Safety level IP 68
Maximum immersion depth [meters] 8
Working position vertical

materials:
Stainless steel pump housing
Stainless steel rotor
Stainless steel inlet strainer
Stainless steel pump shaft

The WQ 1.1 INOX PRO Premium model is designed for operation in very difficult conditions, where the purity of the water is not of the slightest importance and there may be solid elements in it, which in the case of standard pumps can lead to their jamming.

The maximum allowable diameter of foreign bodies in the pumped liquid is 30 millimeters.

The manufacturer has used the highest quality materials in this model, thanks to which the device can easily fulfill its role even in highly polluted water.

Elements that come into contact with the pumped liquid are made of stainless steel.

The manufacturer’s many years of experience have made it possible to design the discharge section in such a way that the liquid cools the engine during operation while pumping contaminants.

The WQ 1.1 INOX PRO Premium uses a 230V motor that generates 1.1kW of power. This allows you to achieve a maximum capacity of 320 liters per minute and the maximum lifting height is 3 meters.

The outlet port of the pump is DN50 (2 inches).

The Omnigena company has equipped the model with a special type of float that allows maintenance-free operation of the unit. In the case when the level of pumped impurities is high, the float allows the unit to start automatically and start working. When the liquid level decreases when pumping, and the float with it, after reaching the appropriate height, the unit automatically turns off. Thanks to this, the WQ 1.1 INOX PRO Premium model is protected against dry running, which can damage the engine.

The WQ 1.1 INOX PRO Premium 230V submersible pump has gained a wide range of customers thanks to its durable construction and ability to work in contaminated water.

It is particularly appreciated when it is necessary to pump out water from, for example, a flooded basement or a pond with a lot of silt.
It is most often used in small farms, agriculture and industry. It will certainly work wherever it is necessary to pump out water that has been additionally contaminated with particles.

No files available.