Your cart is currently empty!
Art.nr: xylQ-7767
Aquatron Phosphorus traps
551,54 €
Connecting materials will be added.
Works only in conjunction with the Aquatron system because you only pass the toilet water through it.
Smart phosphorus trap that you can easily manage yourself and get a cycle on your own plot.
The rinse water is separated from feces and paper that falls into a bio-chamber. Outgoing water without larger particles is filtered through the phosphorus trap.
Since only the flush water from the toilet goes through the phosphorus trap, the volume of the phosphorus trap can be reduced by 85%. It also allows you to place the phosphorus trap before the sludge separator and infiltration as the PH increasing effect is so small as it only handles the toilet water.
Aquatron’s phosphorus trap is based on the same technology as other phosphorus filters (phosphorus traps) on the market, namely filtering outgoing wastewater with phosphorus through a phosphorus-binding material. This material is currently Polonite
A phosphorus filter is a complement to a biological treatment, such as a soil bed. Normally, the customer can choose between phosphorus trap or UV unit with the Aquatron system, depending on local environmental requirements, you choose which is best suited. With a phosphorus trap, you get a high level of protection together with an approved infiltration/ground bed (according to the Nature Conservation Act NFS 2006: 7).
The Aquatron phosphorus trap is a complement to the Aquatron separator, the flushing water is separated from feces and paper that falls into a bio-chamber. Outgoing water without larger particles is filtered through the phosphorus trap.
Since only the flush water from the toilet goes through the phosphorus trap, the volume of the phosphorus trap can be reduced by 85%. It also allows you to place the phosphorus trap before the sludge separator and infiltration as the PH increasing effect is so small as it only handles the toilet water.
The water must be in contact with the Polonite for at least 40 minutes for the phosphorus to be bound in
the Polonite.
There is a 400-450 liter void in a cubic meter of Polonite®, i.e.
Aquatron’s phosphorus trap has with 45 liters of Polonite 18-20 liters of capillary volume (void) which corresponds to approximately 5 flushes of 4 liters before the water is replaced, which guarantees the contact time of 40 minutes in a normal household.
Technical data:
Container:
Volume: 95 liters
Length: 600 mm
Width: 500 mm
Height: 350mm
Weight: 10 kg
Phosphorus binding material:
Volume: 2×30 liters
Calibration: 2-6 mm
D on lid: 315mm
Capillary volume: 18-20 liters
Inlet: 50 mm Effective phosphorus reduction: Ph >9.5
Outlet: 50 mm
VG: 205 mm
Spreading area: 20-40 m²
Connecting materials will be added.
Works only in conjunction with the Aquatron system because you only pass the toilet water through it.
Smart phosphorus trap that you can easily manage yourself and get a cycle on your own plot.
The rinse water is separated from feces and paper that falls into a bio-chamber. Outgoing water without larger particles is filtered through the phosphorus trap.
Since only the flush water from the toilet goes through the phosphorus trap, the volume of the phosphorus trap can be reduced by 85%. It also allows you to place the phosphorus trap before the sludge separator and infiltration as the PH increasing effect is so small as it only handles the toilet water.
Aquatron’s phosphorus trap is based on the same technology as other phosphorus filters (phosphorus traps) on the market, namely filtering outgoing wastewater with phosphorus through a phosphorus-binding material. This material is currently Polonite
A phosphorus filter is a complement to a biological treatment, such as a soil bed. Normally, the customer can choose between phosphorus trap or UV unit with the Aquatron system, depending on local environmental requirements, you choose which is best suited. With a phosphorus trap, you get a high level of protection together with an approved infiltration/ground bed (according to the Nature Conservation Act NFS 2006: 7).
The Aquatron phosphorus trap is a complement to the Aquatron separator, the flushing water is separated from feces and paper that falls into a bio-chamber. Outgoing water without larger particles is filtered through the phosphorus trap.
Since only the flush water from the toilet goes through the phosphorus trap, the volume of the phosphorus trap can be reduced by 85%. It also allows you to place the phosphorus trap before the sludge separator and infiltration as the PH increasing effect is so small as it only handles the toilet water.
The water must be in contact with the Polonite for at least 40 minutes for the phosphorus to be bound in
the Polonite.
There is a 400-450 liter void in a cubic meter of Polonite®, i.e.
Aquatron’s phosphorus trap has with 45 liters of Polonite 18-20 liters of capillary volume (void) which corresponds to approximately 5 flushes of 4 liters before the water is replaced, which guarantees the contact time of 40 minutes in a normal household.
Technical data:
Container:
Volume: 95 liters
Length: 600 mm
Width: 500 mm
Height: 350mm
Weight: 10 kg
Phosphorus binding material:
Volume: 2×30 liters
Calibration: 2-6 mm
D on lid: 315mm
Capillary volume: 18-20 liters
Inlet: 50 mm Effective phosphorus reduction: Ph >9.5
Outlet: 50 mm
VG: 205 mm
Spreading area: 20-40 m²
Article number:
xylQ-7767
Brand:
Aquatron