Your cart is currently empty!
Art.nr: 5907761118218
AC deep well pump 2,5″, 2.5SC4-27, 0.75KW, 230Volt
fr. 367,54 €
Suitable for boreholes up to 40 meters deep
Dimension the maximum pressure (head) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: approx. 5 meters
Static head (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum lifting height by far.
The pump diameter is 68mm and requires at least 75mm inner diameter of the casing
One advantage of this pump is that it can be easily separated into two parts, the electric motor and the pump part.
This means that if the electric motor or pump part of the pump breaks down, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
Submersible pump with 1-phase or 3-phase from the manufacturer Omnigena, is a 2.5″ multistage pump for pumping clean and cold water.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
The pump can be used for drinking water systems, irrigation systems and industry.
The pump is resistant to corrosion and mechanical damage. Shaft, coupling, cable cover, inlet screen are made of stainless steel, impeller and diffusers are made of durable noryl, and the supply and suction ports are made of brass.
The pump works in all, even difficult working conditions. It is adapted for continuous and intermittent operation.
The unit is energy-efficient, quiet, easy to install and operate.
The unit is very efficient. It pumps up to 60 l/min and the maximum lifting height is 75 meters.
There is a valve inside the pump, but this is not a check valve but an anti-sand return valve and protects the hydraulic part from returning sand from the pipeline.
It includes check valve
The length of the pump cable included is 1.5 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
Technical data
Max capacity: 60 l/min.
Max lifting height: 75 m.
Motor power: 0.75 kW.
Voltage: 230V.
Outlet: R25 (1″)
Outlet: Female thread R25 1″
Pump diameter: 68mm
Weight 13 kg, without cable
Max water temperature 35°C
Safety level IP 68
Winding insulation class b
Number of starts max [x/hour] 20
Minimum motor cooling flow [m/s] 0.08
Maximum immersion depth [meters] 50
Working position vertical
materials:
Stainless steel pump housing
Stainless steel cable cover
Stainless steel pump shaft
Impellers and diffusers Noryl
Stainless steel inlet strainer
Brass pressure body
Brass suction body
Product details
Article number:
5907761118218
Brand:
Avloppscenter (AC)
Length of cable:
Cable length 1, 5 meters | Cable length 40 m
Suitable for boreholes up to 40 meters deep
Dimension the maximum pressure (head) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: approx. 5 meters
Static head (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum lifting height by far.
The pump diameter is 68mm and requires at least 75mm inner diameter of the casing
One advantage of this pump is that it can be easily separated into two parts, the electric motor and the pump part.
This means that if the electric motor or pump part of the pump breaks down, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
Submersible pump with 1-phase or 3-phase from the manufacturer Omnigena, is a 2.5″ multistage pump for pumping clean and cold water.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
The pump can be used for drinking water systems, irrigation systems and industry.
The pump is resistant to corrosion and mechanical damage. Shaft, coupling, cable cover, inlet screen are made of stainless steel, impeller and diffusers are made of durable noryl, and the supply and suction ports are made of brass.
The pump works in all, even difficult working conditions. It is adapted for continuous and intermittent operation.
The unit is energy-efficient, quiet, easy to install and operate.
The unit is very efficient. It pumps up to 60 l/min and the maximum lifting height is 75 meters.
There is a valve inside the pump, but this is not a check valve but an anti-sand return valve and protects the hydraulic part from returning sand from the pipeline.
It includes check valve
The length of the pump cable included is 1.5 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
Technical data
Max capacity: 60 l/min.
Max lifting height: 75 m.
Motor power: 0.75 kW.
Voltage: 230V.
Outlet: R25 (1″)
Outlet: Female thread R25 1″
Pump diameter: 68mm
Weight 13 kg, without cable
Max water temperature 35°C
Safety level IP 68
Winding insulation class b
Number of starts max [x/hour] 20
Minimum motor cooling flow [m/s] 0.08
Maximum immersion depth [meters] 50
Working position vertical
materials:
Stainless steel pump housing
Stainless steel cable cover
Stainless steel pump shaft
Impellers and diffusers Noryl
Stainless steel inlet strainer
Brass pressure body
Brass suction body
Article number:
5907761118218
Brand:
Avloppscenter (AC)
Length of cable:
Cable length 1, 5 meters | Cable length 40 m