Your cart is currently empty!
Art.nr: xylq-8750
AC deep well pump 4″ 4S20, 1,5KW, 230Volt
fr. 919,54 €
Suitable for boreholes at a maximum of 100 meters water level with large flow, for example to two houses. Highest quality and very low weight.
Dimension the maximum pressure (head) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: approx. 5 meters
Static head (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum lifting height by far.
The pump diameter is 100mm and requires at least 115mm inner diameter of the casing
Separate terminal box
All single-phase pumps need a capacitor, sometimes mounted inside the motor and sometimes outside.
Included with this pump is an external junction box containing a circuit breaker, circuit breaker fuse and a capacitor.
The four conductors are ground, phase, neutral and an extra neutral via capacitor.
capacitor is to simulate three phase operation.
The advantage of this is that you use a thinner 4-wire cable that is cheaper and that it is easy to replace the capacitor if it breaks.
The disadvantage is that you get an extra cabinet to mount.
The junction box should be installed in a dry place for better component life.
The pump is divisible
An advantage of this pump is that it can easily be separated into two parts, the electric motor and the pump part.
This means that if the pump’s electric motor or pump part breaks, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
The pump is designed in accordance with the NEMA standard (the pump’s hydraulics will be compatible with most motors available on the market) and made of high quality AISI 316 stainless steel. Floating impellers made of black technopolymer ensure easier flow and higher resistance to sand present in the pumped water up to 200 mg/l.
Submersible well pump 4S with Sumoto motor
We offer a model of a pump for a deep well – 4S from Belgiardino with a reliable Sumoto motor.
This small unit with a diameter of 100 cm and in which the electric motor weighs only 6 kg is ideal not only for private use for single-family houses, but also for small businesses. This four-inch pump offers very good performance parameters, is characterized by low operating costs and operational safety.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
The Italian Belgiardino pump is equipped with Sumoto motor. Thanks to a fairly powerful engine, this model is recommended for powering extensive irrigation systems for gardens, construction sites, filling swimming pools, fire protection systems or single-family houses.
The main advantages of the Belgiardino 4S pump
The pump can pump water containing up to 200g/m3 of sand and operate in an immersion of 120m. In addition, the high quality of the materials that make up the pump components are made mainly of stainless steel, which also leads to high abrasion resistance.
It includes a check valve
The length of the pump cable included is 2 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
May need to be purchased for
- Pem slang
- Drill cap, cover for the borehole to protect against contamination
- Lifting cables and clamps
- Single adapter for connecting the pump to the feed pipe
Connection on the outlet is internal thread R32 (1 1/4″)
The length of the pump cable included is 1.5 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
Technical data
Max capacity: 90 l/min.
Max lifting height: 147 m.
Motor power: 1.5 kW.
Voltage: 230V.
Outlet: Internal thread R32 (1 1/4″)
Height: 894 mm.
Pump diameter: 100 mm
Weight 7.5 kg, without cable
Max water temperature: 35°C.
Degree of protection: IP 68.
Winding insulation class: B.
Number of starts up to [x/hour]: 20.
Minimum cooling flow for the motor: 0.08 m/s.
Working position: vertical.
Materials:
Pump housing: stainless steel.
Cable sheath: stainless steel.
Pump shaft: stainless steel.
Impellers and diffusers: glass fiber reinforced material
Inlet strainer: stainless steel.
Outlet: brass.
Suction body: brass.
Product details
Article number:
xylq-8750
Brand:
Avloppscenter (AC)
Length of cable:
AC deep well pump 4" 4S20, 1, 5KW, 230Volt cable length 1, 5 m | AC deep well pump 4" 4S20, 1, 5KW, 230Volt cable length 100 m
Suitable for boreholes at a maximum of 100 meters water level with large flow, for example to two houses. Highest quality and very low weight.
Dimension the maximum pressure (head) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: approx. 5 meters
Static head (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum lifting height by far.
The pump diameter is 100mm and requires at least 115mm inner diameter of the casing
Separate terminal box
All single-phase pumps need a capacitor, sometimes mounted inside the motor and sometimes outside.
Included with this pump is an external junction box containing a circuit breaker, circuit breaker fuse and a capacitor.
The four conductors are ground, phase, neutral and an extra neutral via capacitor.
capacitor is to simulate three phase operation.
The advantage of this is that you use a thinner 4-wire cable that is cheaper and that it is easy to replace the capacitor if it breaks.
The disadvantage is that you get an extra cabinet to mount.
The junction box should be installed in a dry place for better component life.
The pump is divisible
An advantage of this pump is that it can easily be separated into two parts, the electric motor and the pump part.
This means that if the pump’s electric motor or pump part breaks, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
The pump is designed in accordance with the NEMA standard (the pump’s hydraulics will be compatible with most motors available on the market) and made of high quality AISI 316 stainless steel. Floating impellers made of black technopolymer ensure easier flow and higher resistance to sand present in the pumped water up to 200 mg/l.
Submersible well pump 4S with Sumoto motor
We offer a model of a pump for a deep well – 4S from Belgiardino with a reliable Sumoto motor.
This small unit with a diameter of 100 cm and in which the electric motor weighs only 6 kg is ideal not only for private use for single-family houses, but also for small businesses. This four-inch pump offers very good performance parameters, is characterized by low operating costs and operational safety.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
The Italian Belgiardino pump is equipped with Sumoto motor. Thanks to a fairly powerful engine, this model is recommended for powering extensive irrigation systems for gardens, construction sites, filling swimming pools, fire protection systems or single-family houses.
The main advantages of the Belgiardino 4S pump
The pump can pump water containing up to 200g/m3 of sand and operate in an immersion of 120m. In addition, the high quality of the materials that make up the pump components are made mainly of stainless steel, which also leads to high abrasion resistance.
It includes a check valve
The length of the pump cable included is 2 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
May need to be purchased for
- Pem slang
- Drill cap, cover for the borehole to protect against contamination
- Lifting cables and clamps
- Single adapter for connecting the pump to the feed pipe
Connection on the outlet is internal thread R32 (1 1/4″)
The length of the pump cable included is 1.5 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
Technical data
Max capacity: 90 l/min.
Max lifting height: 147 m.
Motor power: 1.5 kW.
Voltage: 230V.
Outlet: Internal thread R32 (1 1/4″)
Height: 894 mm.
Pump diameter: 100 mm
Weight 7.5 kg, without cable
Max water temperature: 35°C.
Degree of protection: IP 68.
Winding insulation class: B.
Number of starts up to [x/hour]: 20.
Minimum cooling flow for the motor: 0.08 m/s.
Working position: vertical.
Materials:
Pump housing: stainless steel.
Cable sheath: stainless steel.
Pump shaft: stainless steel.
Impellers and diffusers: glass fiber reinforced material
Inlet strainer: stainless steel.
Outlet: brass.
Suction body: brass.
Article number:
xylq-8750
Brand:
Avloppscenter (AC)
Length of cable:
AC deep well pump 4" 4S20, 1, 5KW, 230Volt cable length 1, 5 m | AC deep well pump 4" 4S20, 1, 5KW, 230Volt cable length 100 m