Your cart is currently empty!
Art.nr: 5907761103276
AC deep well pump 4″ 4SD 5-20, 2,2KW, 230Volt
fr. 735,54 €
Suitable for boreholes at a maximum of 95 meters water level or lower height with large flow, for example to several houses.
As this pump is a full 2.2 Kw, the maximum cable length is 75 meters with 4mm2 cable, if longer cable is desired, use the 400 volt model instead.
Dimension max pressure (lifting height) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: approx. 5 meters
Static head (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum head by a wide margin.
The pump diameter is 100mm and requires at least 115mm inner diameter of the casing
An advantage of this pump is that it can be easily separated into two parts, the electric motor and the pump part.
This means that if the pump’s electric motor or pump part breaks down, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
Separate terminal box
All single-phase pumps need a capacitor, sometimes mounted inside the motor and sometimes outside.
Included with this pump is an external junction box containing a circuit breaker, circuit breaker fuse and a capacitor.
The four conductors are ground, phase, neutral and an extra neutral via capacitor.
capacitor is to simulate three phase operation.
The advantage of this is that you use a thinner 4-wire cable that is cheaper and that it is easy to replace the capacitor if it breaks.
The disadvantage is that you get an extra cabinet to mount.
The junction box should be installed in a dry place for better component life.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
4 SD pump is resistant to corrosion and mechanical damage. Shaft, coupling, cable cover, inlet screen are made of stainless steel, impeller and diffusers are made of wear-resistant noryl, and the supply and suction ports are made of brass.
It includes a check valve
The length of the pump cable included is 20 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
May need to be purchased for
- Pem slang
- Drill cap, cover for the borehole to protect against contamination
- Lifting cables and clamps
- Single adapter for connecting the pump to the feed pipe
Connection on the outlet is internal thread R50, 2 inches.
It includes check valve
The length of the pump cable included is 20 meters if you do not buy a pre-spliced power cable.
As this pump is a full 2.2 Kw, the maximum cable length is 75 meters with 4mm2 cable, if longer cable is desired, use the 400 volt model instead.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
Technical data
Max capacity: 150 l/min.
Max lifting height: 130 m.
Motor power: 2.2 kW.
Voltage: 230V.
Outlet: Internal thread R50 (2″)
Height: 1366 mm.
Pump diameter: 100 mm
Weight 23 kg, without cable
Max water temperature: 35°C.
Degree of protection: IP 68.
Winding insulation class: B.
Number of starts up to [x/hour]: 20.
Minimum cooling flow for the motor: 0.08 m/s.
Working position: vertical.
Materials:
Pump casing: stainless steel.
Cable sheath: stainless steel.
Pump shaft: stainless steel.
Impellers and diffusers: noryl.
Inlet strainer: stainless steel.
Outlet: brass.
Suction body: brass.
Product details
Article number:
5907761103276
Brand:
Avloppscenter (AC)
Length of cable:
AC deep well pump 4" 4SD 5-20, 2, 2KW, 230Volt, 20m cable | AC deep well pump 4" 4SD 5-20, 2, 2KW, 230Volt, 95m cable
Suitable for boreholes at a maximum of 95 meters water level or lower height with large flow, for example to several houses.
As this pump is a full 2.2 Kw, the maximum cable length is 75 meters with 4mm2 cable, if longer cable is desired, use the 400 volt model instead.
Dimension max pressure (lifting height) required by the pump
Pressure at the tap (max. pressure): 3 bar = 30 meters
Pressure loss from friction in pipes and fittings: approx. 5 meters
Static head (lowest level of the water surface in the well to the top tapping point) = meters
The sum of the heights must always be lower than the maximum head by a wide margin.
The pump diameter is 100mm and requires at least 115mm inner diameter of the casing
An advantage of this pump is that it can be easily separated into two parts, the electric motor and the pump part.
This means that if the pump’s electric motor or pump part breaks down, you can just replace that part and save money.
Those who have bad water that wears out the pump part a lot can have one in reserve at home for quick replacement at lower cost.
Separate terminal box
All single-phase pumps need a capacitor, sometimes mounted inside the motor and sometimes outside.
Included with this pump is an external junction box containing a circuit breaker, circuit breaker fuse and a capacitor.
The four conductors are ground, phase, neutral and an extra neutral via capacitor.
capacitor is to simulate three phase operation.
The advantage of this is that you use a thinner 4-wire cable that is cheaper and that it is easy to replace the capacitor if it breaks.
The disadvantage is that you get an extra cabinet to mount.
The junction box should be installed in a dry place for better component life.
The pump can be used in a wide range of applications, both at home and in the industrial, agricultural and horticultural sectors.
4 SD pump is resistant to corrosion and mechanical damage. Shaft, coupling, cable cover, inlet screen are made of stainless steel, impeller and diffusers are made of wear-resistant noryl, and the supply and suction ports are made of brass.
It includes a check valve
The length of the pump cable included is 20 meters unless you buy a pre-spliced power cable.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
May need to be purchased for
- Pem slang
- Drill cap, cover for the borehole to protect against contamination
- Lifting cables and clamps
- Single adapter for connecting the pump to the feed pipe
Connection on the outlet is internal thread R50, 2 inches.
It includes check valve
The length of the pump cable included is 20 meters if you do not buy a pre-spliced power cable.
As this pump is a full 2.2 Kw, the maximum cable length is 75 meters with 4mm2 cable, if longer cable is desired, use the 400 volt model instead.
Select if you want a pre-spliced drinking water approved power cable in the most common length above the buy button.
If other lengths are desired, it can be ordered against longer delivery time.
Technical data
Max capacity: 150 l/min.
Max lifting height: 130 m.
Motor power: 2.2 kW.
Voltage: 230V.
Outlet: Internal thread R50 (2″)
Height: 1366 mm.
Pump diameter: 100 mm
Weight 23 kg, without cable
Max water temperature: 35°C.
Degree of protection: IP 68.
Winding insulation class: B.
Number of starts up to [x/hour]: 20.
Minimum cooling flow for the motor: 0.08 m/s.
Working position: vertical.
Materials:
Pump casing: stainless steel.
Cable sheath: stainless steel.
Pump shaft: stainless steel.
Impellers and diffusers: noryl.
Inlet strainer: stainless steel.
Outlet: brass.
Suction body: brass.
Article number:
5907761103276
Brand:
Avloppscenter (AC)
Length of cable:
AC deep well pump 4" 4SD 5-20, 2, 2KW, 230Volt, 20m cable | AC deep well pump 4" 4SD 5-20, 2, 2KW, 230Volt, 95m cable