AC Pumping station 175cm, WQ 80 Vortex pump 3-phase

For demanding conditions where the pump often stops
A very powerful vortex pump that does not chew the contents into a thin gruel and is suitable for pumping to a sludge separator or treatment plant.
Also works well in difficult conditions.

Note this pump requires 50mm PEM hose.

Complete ready-to-install pumping station with piping system including check valve and single adapter. Self-cleaning sump.

Bulky delivery, you see the shipping price at checkout
Since shipping is a large part of the price, many people choose to save money and pick up this item at our warehouse in Västerås.

Advantages of 400 volt 3-phase are:

• Much better monitoring of the pump against damage
• the pump loads all 3 phases equally
• The pump is stronger at the moment of starting

Size well
AC villa pumping stations are available in different heights and can easily be cut to the desired height.

• AC villa 175 can be adjusted from 145 to 175cm
• AC villa 245 can be adjusted from 175 to 245cm
• AC villa 345 can be adjusted from 245 to 345cm

Diameter inside: 600mm, diameter outside: 700mm

The well is made of 600mm very strong and durable double-walled plastic pipe that is well tested. We have never had a complaint so far.

• Made of strong double-walled corrugated pipe with smooth inside.
• Adapter system for easy and quick pump removal during maintenance
• Heavy duty pump for high flow and high head

Lock:
The telescopic cover both simplifies maintenance and gives a neater finish to the well.
The telescopic function makes it possible to press the cover when the ground settles, so that the cover is level with the adjacent surface.
Easy to mow with the lawnmower over the cover.

The telescopic lid consists of a telescopic part, lid with flat gasket. The lid has a simple and secure lock with two Allen screws.

Telescopic height is 380 mm (i.e. the well can be raised +380 mm from the height of the well.

The lid can withstand a load of 1.5 tons (load class A15 )

Connections

By default, the outlet is mounted in the well.
The inlet and cable entry are unbored as each installation requires its own unique heights.
All penetrations are included.

• Outlet: 3″ female thread
• Inlet: 110mm (undrilled as standard because it is almost always the wrong height, drilled with 138 mm hole saw)
• Cable gland 50mm (drilled with 76mm)

Quality pump

The WQ 80 INOX 2200 pumps have been designed to minimize the risk of clogging caused by large fractions of solid organic impurities in the pumped medium.
The pumps have an open impeller of the “recessed vortex” type, which is very often used in sewage and industrial pumps.

The maximum allowable diameter for impurities is 50mm.

This type of impeller is in contact with only a small part of the medium being transported, reducing the risk of clogging and wear.

The use of a vortex impeller allows a large free passage of impurities through the impeller chamber of the pump.

The unique design of the impeller allows even impurities with a diameter almost equal to the diameter of the pump suction inlet to flow freely through the impeller chamber.

This solution is ideal for industry and agriculture, for pumping biological wastewater, sludge and liquids containing organic solids.

Characteristic features:
– Compact design and low weight for easy installation, disassembly and mobility
– Simple construction for easy maintenance
– Capacity for organic solids up to 50 mm in diameter
– Open impeller of the “recessed vortex” type.
– Stainless steel pump casing, hydraulic shaft and impeller

Complete with Smart Pump control cabinet with contactor motor protection, overcurrent protection, start, stop, runtime meters and visual runtime status.

Protection functions are

• Dry running
• Overloading
• Pump switched off
• Overvoltage
• Under tension
• Open phase
• Phase reversal

Other features
Timer control for clean cycle
Timer for pump stop during manual control
Pump’s last five fault records are displayed
Displays the pump’s accumulated running time
Dynamic LCD shows the pump’s operating information
Memory function during shutdown and power reset

Pump volumes
It is easy to change the pump volume from 62 to 113 liters by adjusting the length of the cable on the rocker.

Recommended PEM hose size is at least 63 mm

Technical data