Your cart is currently empty!
Art.nr: xylQ-8505
AC Pumping station 75cm tugger pump 1-phase
1.683,14 €
Very low and affordable pumping station with a really good pump Omnigena WQ 15-7-1-1,1 cutting chopper pump for wastewater with WC.
Our new bestseller!
Complete ready-to-install pumping station with piping system including check valve and single adapter. Self-cleaning sump.
Very popular pumping solution for detached houses and holiday homes or houses standing on mountains.
Well size
Internal diameter: 600mm, external diameter: 700mm
The well is made of 600mm very strong and durable double-walled plastic pipe that is well tested. We have never had a complaint so far.
- Made of strong double-walled corrugated pipe with smooth inside.
- Adapter system for easy and quick pump removal during maintenance
- Heavy duty pump for high flow and high head
Lid:
Lid with insulating board to withstand freezing temperatures.
The lid can withstand a load of 150 kg
Connections are pre-drilled and assembled
This pumping station has all connections mounted as it is so low that it is limited to installing penetrations in certain places.
- Outlet: R32 (1 1/4″) female thread – Hose connector for 32mm hose included.
- Inlet: 110mm, 500mm height from center of pipe to ground level.
- Electrical penetration 200mm from center of penetration to top of well
Quality pump
The WQ 15-7-1.1 submersible pump is a pump designed for wastewater, sludge, dirty water with the presence of organic and household contaminants with a chewing function that cuts down all material.
A quality pump from the Polish family business Omnigen, which has been around since 1974 and has produced 1.3 million pumps.
The pump has an efficient cutting system that cuts the pumped medium into small pieces so that the installation does not clog and that you can use hose with diameters from 32mm.
The pump has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running.
The pump is equipped with overcurrent protection that protects the unit’s motor from overloading in case of blocking the rotor with fixed elements, such as a stick or a stone.
WQ 15-7-1.1 Premium is sized to provide a significant pressure of 18 mvp and a large flow of 5.7 l/sec required to ensure self-cleaning in sewer systems.
Pump volumes
Since the well is so low, it is not possible to change the pump volume much, but it is about 50 liters.
Recommended PEM hose size is 40 mm
Technical data pump:
| Maximum water temperature | 35°C |
| Enclosure class | IP 68 |
| Maximum immersion depth [meters] | 10 |
| Working position | Vertical |
| Max flow rate | 340 l/min |
| Maximum pressure | 18 m |
| Voltage | 230 volts |
| Rated current | 6,5 A |
| Connection | 2″ (R50) female thread |
| Cable length | 10 m |
| Weight (kg) | 27 kg |
material
| Pump housing | Cast iron |
| Rotor | Cast iron |
| Cutting systems | Stainless steel |
| Pump shaft | Stainless steel |
Very low and affordable pumping station with a really good pump Omnigena WQ 15-7-1-1,1 cutting chopper pump for wastewater with WC.
Our new bestseller!
Complete ready-to-install pumping station with piping system including check valve and single adapter. Self-cleaning sump.
Very popular pumping solution for detached houses and holiday homes or houses standing on mountains.
Well size
Internal diameter: 600mm, external diameter: 700mm
The well is made of 600mm very strong and durable double-walled plastic pipe that is well tested. We have never had a complaint so far.
- Made of strong double-walled corrugated pipe with smooth inside.
- Adapter system for easy and quick pump removal during maintenance
- Heavy duty pump for high flow and high head
Lid:
Lid with insulating board to withstand freezing temperatures.
The lid can withstand a load of 150 kg
Connections are pre-drilled and assembled
This pumping station has all connections mounted as it is so low that it is limited to installing penetrations in certain places.
- Outlet: R32 (1 1/4″) female thread – Hose connector for 32mm hose included.
- Inlet: 110mm, 500mm height from center of pipe to ground level.
- Electrical penetration 200mm from center of penetration to top of well
Quality pump
The WQ 15-7-1.1 submersible pump is a pump designed for wastewater, sludge, dirty water with the presence of organic and household contaminants with a chewing function that cuts down all material.
A quality pump from the Polish family business Omnigen, which has been around since 1974 and has produced 1.3 million pumps.
The pump has an efficient cutting system that cuts the pumped medium into small pieces so that the installation does not clog and that you can use hose with diameters from 32mm.
The pump has a float control that controls its activation depending on the level of the pumped medium and protects the pump against dry running.
The pump is equipped with overcurrent protection that protects the unit’s motor from overloading in case of blocking the rotor with fixed elements, such as a stick or a stone.
WQ 15-7-1.1 Premium is sized to provide a significant pressure of 18 mvp and a large flow of 5.7 l/sec required to ensure self-cleaning in sewer systems.
Pump volumes
Since the well is so low, it is not possible to change the pump volume much, but it is about 50 liters.
Recommended PEM hose size is 40 mm
Technical data pump:
| Maximum water temperature | 35°C |
| Enclosure class | IP 68 |
| Maximum immersion depth [meters] | 10 |
| Working position | Vertical |
| Max flow rate | 340 l/min |
| Maximum pressure | 18 m |
| Voltage | 230 volts |
| Rated current | 6,5 A |
| Connection | 2″ (R50) female thread |
| Cable length | 10 m |
| Weight (kg) | 27 kg |
material
| Pump housing | Cast iron |
| Rotor | Cast iron |
| Cutting systems | Stainless steel |
| Pump shaft | Stainless steel |
Article number:
xylQ-8505
Brand:
Avloppscenter (AC)