Check valve R20 (3/4″)

Check valve, Europe in brass with spring-loaded stainless steel cone for water, cooling, air and heating.

Independent of location.

Working temperature: -20°C/+100°C.

The non-return valve plays an important role in installations with pumps.

It is designed to protect the hydraulic system against fluid backflow. The check valve can be mounted on both vertical and horizontal pipelines, it must be mounted in accordance with the marking on the housing in the direction of water flow in the system

Technical data:
Brass housing
Stainless steel spring
Max working pressure 16 bar
Working temperature: -20ºC/+100ºC

Mounting:
1. The check valve can be mounted in any installation position.
2. Arrow on the valve body shows the direction of flow.
3. Avoid clamping the valve in a vice or with pipe wrenches. Use fixed keys or wrenches.

Operation and maintenance:
The non-return valve is normally maintenance free.
The function should be checked regularly.
Dirt and particles can get stuck in the valve or form a film on the gasket surface. This means that the valve cannot close properly and food can therefore leak through.
If the above occurs, the non-return valve can be dismantled and cleaned inside the
valve body or the valve can be replaced with a new one.

No files available.