idSET-34 LIQ WITH A HIGH LEVEL SENSOR

Indicates when the liquid level in the oil separator rises too much, e.g. in a situation with a blockage in the outlet or to a closed tank
Included in the package

• idSET-34 oil separator alarm
• idOil-LIQ high liquid level sensor
• LCJ1-1 Cable splice for three sensors

idSET-34 is an easy-to-use alarm.
It can be equipped with up to three different types of idOil sensors that are automatically identified at the touch of a button, making commissioning very simple.

In these situations, the buzzer sounds, the display shows an alarm and the relay switches

High liquid level alarm, when the liquid level in the oil separator rises excessively, e.g. when the outlet is blocked

Oil layer alarm, when the full capacity of the oil separator for oil or gasoline has been reached.

Sand/sludge alarm, when the sludge layer at the bottom of the separator has reached its maximum level.

Leakage alarm, when the liquid level drops unexpectedly in the separator.

Sensors
– 4 relays, one for each sensor and one for faults.
– Two-wire digital sensor bus
– Up to three different idOil sensors
– Polarity-free sensor connection
– Automatic sensor connection
– Fast commissioning at the touch of a button
– LED lights for sensor alarm, sensor fault and saturation voltage
– Integrated buzzer for alarm

Cable splice
Only one 2-wire cable is needed from cable connector to central unit, thanks to the digital bus. idOil-LIQ idOil-OIL idOil-SLU Cable connectors are used for cable extension between the sensors and the controller. They are oil resistant, IP68 and suitable for ATEX Zone 0. Single device according to IEC/EN 60079-11.