Jets Vacuumarator pump 15MB Flexi Plus 230V

Flexi Plus is a very good solution for cottage areas with holiday homes, villas and in other contexts with a need for sewage systems for up to 15 toilets, and the need for long pipe runs. With System Flexi Plus, it is also possible to lay the pipes at roof level, for example to save space. If there is a need for even larger facilities, we can also supply systems for this.

Flexi Plus operates according to the CVS principle: Constant Vacuum System, which means that the pipe system is kept under vacuum at all times and not just when you press the flush button.

Since the sewage system is relatively large and dimensioned for many, a larger vacuum pump is also required. We recommend a pump with a voltage capacity of 230V. Of course, it is also possible to read the number of flushes and operating hours of this upgraded pump.

The system is dimensioned for more toilets and thus also for larger pipe distances/pipe volumes. There should be a total pipe length between toilet and pump of 20 meters. Between the pump and the tank, the pipe length can be up to 100 meters.
Electronic control is possible, including functions for monitoring, alarms and counters for the number of flushes

Flexible positioning of the system: you decide whether it is most convenient to have the Vacuumarator™ pump behind the toilet, next to it or perhaps on a different floor.

Waste can be pumped up to 5 meters between the pump and the tank, which is practical, for example, when placing the toilet and pump on different floors. The vacuum pipes between toilet and pump can be placed at ceiling level.
The system blocks flushing when the tank is full (Requires a level switch as an accessory in the tank)
The vacuum pump (with a capacity of 15MB) should always be at the same level as or lower than the lowest toilet in the system.
The sewage system can be combined with all our different models of toilets, which are available for both floor or wall mounting.