Your cart is currently empty!
Art.nr: D242
Thread tape 19mm x 50 meters
5,43 €
Very good thread tape that we use ourselves.
Made of PTFE, resistant to mineral oils, gasoline, city gas, LPG, acids, gases, water, etc.
Length: 50 m
Width: 19 mm
Thickness: 0.076 mm
Thread tape for sealing all types of threaded connections in, for example, compressed air, cooling systems, heating, water and ventilation systems. Can be used on all kinds of materials (iron, metal, plastic, fibers etc.). Thread tape is also suitable for facilities with high hygiene requirements (hospitals, food industry, etc.).
Remove any dirt and metal chips from the threads before applying the thread tape. The tape is applied to the threaded section in the direction of the thread pitch. It is applied with an even, firm pull so that it is stretched over the threads. Depending on the desired layer thickness, the overlap should be from ½ to ¾ tape width. After the threaded coupling has been tightened, no counterscrewing should take place. Depending on the pipe dimension, the following tape types are recommended
The above information is given on the basis of tests and experience. As we have no control over the use of the product, sample installation is recommended to ensure that the product is suitable for the desired installation
Product details
Article number:
D242
No files available.
Very good thread tape that we use ourselves.
Made of PTFE, resistant to mineral oils, gasoline, city gas, LPG, acids, gases, water, etc.
Length: 50 m
Width: 19 mm
Thickness: 0.076 mm
Thread tape for sealing all types of threaded connections in, for example, compressed air, cooling systems, heating, water and ventilation systems. Can be used on all kinds of materials (iron, metal, plastic, fibers etc.). Thread tape is also suitable for facilities with high hygiene requirements (hospitals, food industry, etc.).
Remove any dirt and metal chips from the threads before applying the thread tape. The tape is applied to the threaded section in the direction of the thread pitch. It is applied with an even, firm pull so that it is stretched over the threads. Depending on the desired layer thickness, the overlap should be from ½ to ¾ tape width. After the threaded coupling has been tightened, no counterscrewing should take place. Depending on the pipe dimension, the following tape types are recommended
The above information is given on the basis of tests and experience. As we have no control over the use of the product, sample installation is recommended to ensure that the product is suitable for the desired installation
Article number:
D242
No files available.