Sepko Oil separator 15 l/s, sand trap 1500L

Complete with two covers and two telescopic shafts below.

Shipping may be added depending on the delivery address!

Alarm and sampling well are available as accessories.

Class 1 separator less than 5 mg/l,
Sand trap volume 1500l.

Mounted ladder is integrated in the neck and provides an easy and safe descent to the hopper for
service personnel. The neck is designed with a telescopic function so that the water flow to the finished ground can be adjusted within a 200mm range. The neck is designed for connection to standard polyethylene or cast iron telescopic cap/neck for load categories.

Maintenance is very simple, it does not require much labor and material costs. The main maintenance operation – washing of coalescence modules with high pressure washer after removal from the container. Packages can be washed easily from 4 sides, so after the maintenance is returned to the oil separator 100% functionality. In Sepko, no replaceable filters are used, which after the replacement would be disposed of as hazardous waste.
Oil products accumulated on the water surface are sucked away using special grips and drained to a separate oil storage tank.

SEPKO separators are tested and approved according to European standard EN 858-1. Treatment efficiency testing (i.e. determination of the nominal size of the separator, watertightness and tank stability) was carried out by independent authorities. After treatment with SEPKO, a residual hydrocarbon content in the water of less than 5 mg/l is achieved. This emission value is mandatory for class I oil separators according to standard EN 858-1.